0 ~ 50V 0 ~ 5000A 250KW Babban Mai Gyaran Wuta na Hydrogen Electrolytic
fasali
-
Ma'aunin shigarwa
Shigar da AC 480v± 10% 3 Mataki -
Ma'aunin fitarwa
DC 0 ~ 50V 0 ~ 5000A ci gaba da daidaitacce -
Ƙarfin fitarwa
250KW -
Hanyar sanyaya
sanyaya iska mai tilastawa / sanyaya ruwa -
PLC Analog
0-10V/ 4-20mA/ 0-5V -
Interface
Saukewa: RS485/RS232 -
Yanayin Sarrafa
ƙirar nesa -
Nunin allo
nuni na dijital -
Kariya da yawa
rashin lokaci kan dumama over-voltage over-current circuit -
Hanyar sarrafawa
PLC / Microcontroller
Model & Bayanai
| Lambar samfurin | Fitowar ripple | Madaidaicin nuni na yanzu | Madaidaicin nunin volt | Daidaitaccen CC/CV | Ramp-up da ramp-down | Yawan harbi |
| Saukewa: GKD50-5000CVC | VPP≤0.5% | ≤10mA | ≤10mV | ≤10mA/10mV | 0 ~99S | No |
Aikace-aikacen samfur
Ana amfani da mai gyara iskar gas ɗin lantarki a cikin haɗin lantarki na hydrogen, sulfur hexafluoride, carbon tetrafluoride, sulfur hexafluoride, ultra pure ammonia da sauran iskar gas na musamman.
A lokacin electrolysis, cations a cikin electrolyte ƙaura zuwa cathode da electrons an rage a anode. Anion yana gudu zuwa anode kuma ya rasa electrons don zama oxidized. An haɗa na'urori biyu a cikin maganin jan karfe sulfate kuma an yi amfani da halin yanzu kai tsaye. A wannan lokacin, za a sami jan ƙarfe da hydrogen suna hazo daga farantin da aka haɗa da cathode na samar da wutar lantarki. Idan anode na jan karfe ne, rushewar jan karfe da hazo oxygen suna faruwa a lokaci guda.
Samar da hydrogen ta hanyar electrolysis na ruwa shine rabuwar kwayoyin ruwa zuwa hydrogen da oxygen ta hanyar tsarin lantarki a ƙarƙashin aikin kai tsaye. Bisa ga daban-daban diaphragm, shi za a iya raba zuwa alkaline ruwa electrolysis, proton musayar membrane electrolysis da m oxide electrolysis.
tuntube mu
(Za ku iya kuma shiga kuma ku cika ta atomatik.)
