JININ GKDH- JAYA 18V 1200A GABATARWA MAI GYARA.

1. juyawa da hannu

1. saita akwatin kula da nesa"Maɓallin fitarwa"ku"kashe",saita da"tsari mai kyau" "Reverse regulation"zuwa mafi ƙarancin;saita da"yanayin aiki" to "(CC-constant current)" or (CV-voltage na yau da kullun)kamar yadda kuke bukata.

2. saita"Yanayin baya" to "manual",idan saita"manual positive",saka da"Maɓallin fitarwa" to "na",daidaita lokacin"tsari mai kyau", sannan mai gyara yana fitar da ingantaccen ƙarfin lantarki / halin yanzu kamar yadda kuke buƙata;saita da"juyawa da hannu", saita"Maɓallin fitarwa" to"ON",daidaita"Reverse regulation", mai gyara yana fitar da wutar lantarki ta baya / halin yanzu kamar yadda bukatun ku

Lura.Karkashin"Yanayin hannu", Idan ya canza"manual positive" to "Manual Reverse";ko canza"Manual Reverse" to "manual positive",kafin canji, saitin farko"Maɓallin fitarwa" to "kashe",sannan canza"manual positive" to "Manual Reverse";ko canza"Manual Reverse"to "manual positive"kamar yadda kuke bukata, sannan saita"Maɓallin fitarwa" to "bude".

2. Juya ta atomatik

Mataki 1. saitatabbataccekumajuya aiki halin yanzu ko ƙarfin lantarki( gama saitin ƙarƙashin yanayin jagora).

Mataki 2. saita"Maɓallin fitarwa" to "kashe"

Mataki 3. canza"reverse mode” zo"atomatik",Hasken LED, mai gyara ya shiga cikin jiran aiki, sannan saita jimlar lokacin aiki"J0", saita ingantaccen lokacin aiki"J1",canza lokacin"J2"=1s, saita juyi lokaci"J3",saita lokacin juyawa"J4" =1s .

Mataki 4. saita"Maɓallin fitarwa" to "ON",latsa"fara", mai gyara ya shiga cikin tsarin aikin da aka saita, sannan ya gama shirin, mai gyaran yana rufe ta atomatik tare da karar ƙararrawa.

Mataki 5. danna"sake saita", ƙararrawa zai tsaya, mai ƙidayar lokaci ya shiga jiran aiki.Idan kana son gyara ya sake gudu, danna kawai"fara"

Lura:Idan kawai aikin tabbatacce ne kawai, saita mai ƙidayar lokaci “J0”= “J1” “J2” “J3” “J4”=0

Idan kawai so kawai baya aiki, saita mai ƙidayar lokaci “J0”= “J3” “J1” “J2” “J4”=0

Umarni don Multi-timer

Nunawa:

0=J0=JUMMAN LOKACIN AIKI

1=J1

2=J2

3=J3

4=J4

Jimlar lokaci 0:

Mataki 1: Danna sau biyu SET

Mataki 2: Danna M+ ko M- don canza lokacin da kuke buƙata.

Mataki na 3: Danna START don zaɓar naúrar (M/S/0.1S)

Ƙare jimlar matakan matakan lokaci (J0), da fatan za a ci gaba da kammala matakan da aka bi.

Lokaci Mai Kyau 1

Mataki 1: Danna SET (lokaci ɗaya kawai),

Mataki 2: Danna M+ ko M- don canza lokacin da kuke buƙata.

Mataki na 3: Danna START don zaɓar naúrar (M/S/0.1S)

Ƙare matakan tabbataccen lokaci, da fatan za a ci gaba da kammala matakan da aka bi.

2

Mataki 1: Danna SET (lokaci ɗaya kawai),

Mataki 2: Da fatan za a saita J2 ya zama 1s ko 2s

Mataki 3: Danna START

3

Juya Lokaci

Mataki 1: Danna SET (lokaci ɗaya kawai),

Mataki 2: Danna M+ ko M- don canza lokacin da kuke buƙata.

Mataki na 3: Danna START don zaɓar naúrar (M/S/0.1S)

Ƙare matakan baya na lokaci, da fatan za a ci gaba da kammala matakan da aka bi.

4

Mataki 1: Danna SET (lokaci ɗaya kawai),

Mataki 2: Da fatan za a saita J4 ya zama 1s ko 2s

Mataki 3: Danna START

A ƙarshe, Danna SET don ajiye duk matakai.Sannan danna START.Mai ƙidayar lokaci zai fara aiki.

PS:

1. Maimaita yanayin aiki: lokacin J0>J1+J2+J3+J4 lokaci.Mai ƙidayar lokaci zai maimaita aiki har sai jimlar lokacin ya ƙare.Sannan danna RESET (wannan maballin yana kan panel of rectifier)

Yanayin aiki guda ɗaya: J0=J1+J2+J3+J4.Mai ƙidayar lokaci yana aiki sau ɗaya kawai.Idan lokaci ya kure, da fatan za a danna RESET (wannan maɓallin yana kan panel na gyarawa)

Jadawalin shine kamar haka: